!! ------------------- 
!! Namelist for SOSIE 
!! ------------------- 
!!
!! *********************** 
!! Input characteristics : 
!! *********************** 
!! 
!!&ninput
&ndom_src
csource    = 'OSI-SAF-450'
ivect      = 0    ! this is not a vector interpolation
l_reg_src  = .false.    ! input grid is not regular (lon and lat are "1D") then false. 
cf_src     = 'mask_in_HHEEMMII-TTAAGG.nc'
cv_src     = 'mask'
cv_t_src   = 'time'
cf_x_src   = 'mask_in_HHEEMMII-TTAAGG.nc'	! AD add but not sure what is it ... WARNING 
cv_lon_src = 'lon'
cv_lat_src = 'lat'
cf_lsm_src = 'missing_value'   ! we use 'missing_value' of input field to determine
cv_lsm_src = ''                ! the land-sea-mask
ewper_src  = 0 
!!
!! Only required if 3D interpolation (jplev==0):
!!cf_z_src  = ''
!!cv_z_src  = ''
!! ROMS s-coordinates stuff only:
!!ctype_z_src = ''
!!cf_bathy_src = ''
!!cv_bathy_src = ''
!!   ROMS s-coordinates parameters (if ctype_z_src or/and ctype_z_trg = 'sigma' )
!!   Vtransform | Vstretching | Nlevels | theta_s | theta_b | Tcline | hmin
!!ssig_src =  2,         4,         40,       7.,       2.,     250. ,   15.
/
/
!!
!! No need for sosiev3, so removed (AD)
!!jt1        = 0    ! we want to interpolate each time record
!!jt2       = 0    !
!!
!!ldrown    = F            ! we want to propagate sea values onto the land-sea mask
!!ewper     = -1          ! input field does have east-west periodicity with 0 overlapping point
!!vmax      =  1
!!vmin      =  0!!
!!
!! ***********************************
!!  IF 3D INTERPOLATION ( jplev = 0 )
!! ***********************************
!! 
!! This namelist section is not required as we do pure 2D interpolation
!!
!!
!!
!! ***************************** 
!! Output Grid characteristics : 
!! ***************************** 
!! 
!!
!&noutput
!!
&ndom_trg
ctarget    = 'ORCA1'
l_reg_trg  = .false.
cf_x_trg   = '/gpfs/home/acad/ucl-elic/adelhass/git/EnKF/conversion_uf/mask-ORCA1.nc'
cv_lon_trg = 'nav_lon'
cv_lat_trg = 'nav_lat'
cf_lsm_trg = '/gpfs/home/acad/ucl-elic/adelhass/git/EnKF/conversion_uf/mask-ORCA1.nc'
cv_lsm_trg = 'tmask'
ewper_trg  = 2
!lmout      = T
!rmaskvalue = -99999999.
!lct        = F      ! we use time from input file
!t0         = 0
!t_stp      = 0
/
!! 
!! 
!! 
!! 
!! ******************************* 
!! Netcdf output characteristics : 
!! ******************************* 
!! 
!!&nnetcdf
!!cmethod  = 'bilin'
!!cv_l_out = 'nav_lon'
!!cv_p_out = 'nav_lat'
!!cv_t_out = 'time_counter'
!!cv_out   = 'tmask'
!!cu_out   = ''
!!cu_t     = ''
!!cln_out  = 'tmask'
!!cd_out   = '.'
!!csource  = 'OSISAF-HHEEMMII'
!!ctarget  = 'TTAARRGGEETT'
!!cextra   = 'TTAAGG'
!!/ 
!!
!!
!! *****************************************************************
!! &ninterp => stuff related to interpolation and pre/post processing
!!             of data
!! *****************************************************************
!!
!! cmethod  : the 2D interpolation method to be used
!!
!!            * use 'akima' if your source domain is regular (non-distorted grid)
!!
!!            * use 'bilin' otherwise (bilinear 2D interpolation)
!!
!!            * use 'no_xy' to only perform vertical interpolation, i.e. interpolate a
!!              a 3D field given on ni*nj and nk_src levels to the same ni*nj 2D domain
!!              but on nk_trg levels!
!!              => for example interpolates a 3D field from grid ORCAX.L46 to ORCAX.L75
!!
!! idrown : Three values in this structure: np_drown, nt_smooth, l_msk_chg ([integer],[integer],[boolean]):
!!          * np_drown : whether we call DROWN land filling procedure (>0) or not (=0)
!!            which propagates/extrapolates sea values (defined where lsm==1) of field
!!            cv_src by "np_drown" grid points over land regions (defined where lsm==0)
!!          * nt_smooth : the number of time smoothing is applied on drowned regions
!!            (only performed on land regions)
!!          * l_msk_chg : wether the missing/masked points region (land) on source field is changing with time!
!!          => this treatment has absolutely no impact over sea regions, only over land
!!          regions, it is intended to prevent land values to polute/contaminate sea
!!          regions during the interpolation process!
!!
!! ixtrpl_bot : in case of 3D interpolation, this option forces sosie to vertically
!!              extrapolate the source field (on its source grid) downward into the
!!              bedrock prior to interpolation
!!              = 0 : not used
!!              = 1 : used, method => persistence of the wet bottom point value
!!              = 2 : used, method => using the DROWN routine...
!!
!! l_save_drwn : save the input field after it has undergone "DROWNING" (idrown > 0!)
!!               and/or downward bedrock extrapolation (ixtrpl_bot > 0!)
!!
!! ismooth : if ismooth > 0 the field to be interpolated will be smoothed
!!           prior to interpolation. By applying ismooth times a type of
!!           closest neighboors boxcar smoothing algorithm
!!           (check "SMOOTH" of mod_drown.f90)
!!         => this is usefull to avoid sub-sampling when your target
!!            grid is much coarser than your source grid
!!            (i.e. when interpolating from high-res to low-res)
!!         => start with a multiple of 10, typically 20, and adjust depending
!!            on the result
!!
!! jt1     : first time record to be interpolated
!! jt2     : last  time record to be interpolated
!!           => set jt1 and jt2 to 0 if you want to skip this option
!!              and interpolate the nt time steps of the current field
!!
!! jplev : level to treat if your file is 3D (spatial), has no influence if
!!         your file is 2D in space !
!!       ------------------------------------------------------------------
!!        jplev > 0 = level to treat (ex : jplev = 1 will interpolate only
!!                    surface field corresponding to the 1st level )
!!       ------------------------------------------------------------------
!!        jplev = 0 : perform 3D interpolation (if source file is 3D) !!! |
!!       ------------------------------------------------------------------
!!        jplev = -1 : overrides good sense and forces sosie to understand that
!!                     your field to interpolate is 2D with a time record
!!                     (usually the case if the time record dimension in your
!!                      source file is not declared as UNLIMITED => bad! )
!!                     => so SOSIE doesn't mistake this time record with a depth!
!!       -------------------------------------------------------------------
!!
!! vmax    : upper bound not to exceed for treated variable [real]
!! vmin    : lower bound not to exceed for treated variable [real]
!!
!! ismooth_out : smooth the freshly interpolated field on the target grid
!!               ismooth_out times! (see ismooth above)
!!
&ninterp
cmethod     = 'bilin'
!!
idrown      = 100,50
ixtrpl_bot  = 0
l_save_drwn = .true.
ismooth     = 0
jt1         = 0
jt2         = 0
jplev       = 1
vmax        =  1.E6
vmin        = -1.E6
ismooth_out = 0
!!ibx_xtra_sm = 0, 0,0, 0,0  ! Extra-smoothing on a given rectangular region: ibx_xtra_sm = ntimes, i1,j1, i2,j2
/
!!
!!
!! *****************************************************************
!! &noutput => info on the (horizontal) interpolation method to use
!!             and the netcdf file to generate
!! *****************************************************************
!!
!! This mostly deals with how the output file to be created is going to look like!
!!
!!
!! *** Into the netcdf file to be created : ***
!! cv_out   : name for treated variable in the output file                [char]
!! cu_out   : if not = '': then change the unit of treated variable units [char]
!! cln_out  : if not = '': then change the long name treated variable     [char]
!! cv_t_out : name of time record vector in the output file [char]
!!            => set to cv_t_out='' if no time dimension
!! cd_out   : directory to create output file to                          [char]
!!
!! *** Naming of the output file : ***
!! cextra   : short extra indication about the file            [char]
!!
!! lmout : whether to mask the interpolated field on the target file [logical]
!!         if lmout is set to .FALSE. and cf_lsm_trg is different than '' the target
!!         field will be drowned using the mask defined by cf_lsm_trg (and cv_lsm_trg)
!!
!! rmiss_val : missing value given to target field (for continents) [real]
!!
!! lct   : whether to control or not time variable [logical]
!!         TRUE -> specify time array with starting time 't0' and step 't_stp'
!!                 usefull if you do not have a "time" variable in your source netcdf file !
!!         FALSE -> same time array as in source file is used
!! t0    : time to start (if lct is set to .TRUE.) [real]
!! t_stp : time step (if lct is set to .TRUE.) [real]
!!
!! Only required if 3D interpolation (jplev==0):
!!    cv_z_out: name you wish to give to depth variable in file to be created...
!!
!!
&noutput
cv_out    = 'tmask'
cu_out    = ''
cln_out   = 'tmask'
cv_t_out  = 'time_counter'
cd_out    = '.'
cextra    = 'TTAAGG'
lmout     = .true.
rmiss_val = -99999999.
lct       = .false.
t0        = 0.
t_stp     = 0.
!! Only required if 3D interpolation (jplev==0):
!!cv_z_out  = 'depth'
/